CNC Lathes
Three Mori Seiki 5-Axis NL2500 Lates with 80mm thru bore and
equiped with bar feeders.
Three Mori Seiki
2-Axis Lathes all with Fapt Control, allowing for quick program
development, and the capacity to accommodate 350mm dia x 1000mm
long.. We specialise in high quality and difficult machining
jobs. |
 |
CNC Machining Centres
One Horizontal Mori Seiki NH400 DCG with twin pallet (560mm
x 560mm x 650).
Four CNC machining
centres, all with 4th axis capability are well tooled for most customers
requirements. ( 1,000mm x 400mm x 400mm ) |
 |
Hole Starter
A Hole Starter with the capacity to produce holes from 0.1mm to
4.0mm dia holes. Ideal for hard materials. |
 |
General Milling and Turning
Our manual milling and turning section is setup for small runs
as well as the manufacture of jigs and fixtures. ( 1,500mm x 400mm
x 400mm ) |
 |
Grinding
Our grinding area is equipped to carry out specialised grinding
of jigs and other hardened items. ( Surface grinder 500mm x 300mm
x 300mm ) ( Internal grinder 380mm dia magnetic chuck x 300mm long
) ( Cylindrical 200mm dia x 500mm long ) ( Tool & cutter grinder
150mm x 900mm ) |
 |
Spray Fusion
Spray fision - a surface coating for protection or for reclaimation
of parts. ( There is a large range of powders available for most applications
) |
 |
Polishing
We are able to polish to a high quality as required by our customers.
( spinner type 300mm dia ) |
 |
EDM
Spark Erosion. ( 500mm x 300mm ) |
 |
Sawing
We have two fully automatic power band saws. ( 300mm dia ) |
 |
Toolmaking
Toolmaking and repair to dies, moulds, blanks etc.
|
 |
Heavy Duty Pallet Systems
The heavy duty steel pallets manufactured by TR Savage have been
designed to work in conjunction with standard racking systems.
Printout our RFQ (Request for quotation) form,
PDF
format.(119K) |
 |
Fabrication
In addition to the fabrication of customer designed parts we have
developed our own range of trays and trolleys for industry. ( oxy
weld*mig weld*tig weld*stellite*plasma cutting to 40mm ) |
 |
|
Inspection
A CMM installed to measure all components.
A Projector and Hadness
Tester as well as a number of quality hand held measuring devicesWe
design and manufacture custom built trailers to suit wide range
requirements. Using gal, stainless steel, powder coating etc.
From single & dual axle trailers to electric & manual type
winches. |
 |
